Novanex POE Analog Clocks
Benefits
- Continual synchronization
- Easy installation
- Easy maintenance and management
- Energy efficiency
- Reliability
- Three-year warranty
- Novanex POE clocks are assembled in the USA
Warranty
Novanex warranties all products for a period of three years from date of purchase.Maintenance
Novanex PoE clocks are powered directly from the network. Maintenance consists of periodic physical and visual checks on clocks and verification of the clocks' network configuration. A clock monitoring and connection alerting system is available. Surfaces can be cleaned with mild detergent. Contact Novanex for literature describing resistance qualities with other cleaning agents.- Power supplied over standard Cat-5 cabling using the IEEE 802.3af Power over Ethernet standard
- *Note: Inova double sided analog clocks only require ONE Ethernet connection!
- Low 3 watt power consumption
- No master clock or serial connection required
- Time set automatically by SNTP (Simple Network Time Protocol)
- Automatic adjustment for Daylight Saving Time
- Compatible with DHCP or static IP addressable 10/100BaseT Ethernet
- ETL Listed, CE Marked
- Optional cloud-based management system available
- Fully assembled in the USA
- Three year warranty
- Power supplied over standard Cat-5 cabling using the IEEE802.3af (PoE+ compatible) Power over Ethernet standard
- Low power consumption—3 watts (single) 4 watts (double)
- No master clock or serial connection required
- UL 60950-1, CAN/C22.2 ETL Listed
- CE Marked, RoHS compliant
Technical Specifications
Single-sided Clocks
Model: ONTA12-BK
Cabinets: Diameter: 12 3/4" (29.5 cm) Depth: 17/8 " (5.1 cm) Material: injection-molded black ABS plastic
Weight: 1.6 lb. (0.73 kg) including bracket
Viewing Distance: 100+ feet
Accuracy: ±1 second
Operating Temperature: 32–104° F (0–40 C)
Operating Humidity: 95% maximum, non-condensing
Power Consumption: 4 watts, single PoE cable
Mounting Options: Ceiling or cantilever wall mount
Double-sided Clocks
Model: ONTA12DS-B
Cabinets: Diameter: 12 3/4" (29.5 cm) Depth: 4 " (10.8 cm) Material: black injection-molded ABS plasti
Weight: 7 lb. (3.2 kg) including bracket
Viewing Distance: 100+ feet
Accuracy: ±1 second
Operating Temperature: 32–104° F (0–40 C)
Operating Humidity: 95% maximum, non-condensing
Power Consumption: 4 watts, single PoE cable drives both clocks
Mounting Options: Ceiling or cantilever wall mount
Mounting Options
- Surface Mount - OnTime clocks have one keyhole slot on the back for surface mounting.
- Pendant/Cantilever - The double-sided clock is supplied with a mounting bracket that allows you to choose wheter to suspend it on the ceiling or mount on the wall, allowing greater visibility in open areas or hallways. You can also piggyback two clocks, so time is visible in both directions.
*Note: Inova double sided analog clocks only require ONE Ethernet connection, and come fully assembled!
PoE Injectors
The Phihong Single Port 19.6W Injector provides a cost-effective Power over Ethernet (PoE) implementation for low terminal density installations. IEEE 802.3af compliant, the Phihong 19.6W provides power to virtually any PoE ready device.
-Model Number: 722442
-Fully Compliant Detection, Disconnect, Overload and Voltage Control IEEE802.3af
-Interal Signature Resistance IEEE802.3af standard
-UNH IOL Test Report
-Diagnostic LEDs
-Full Protection OTP, OCP, OVP
-Non-Vented Case
-Mounting Kits
Protective Wire Guards
For enhanced protection of your OnTime Clock
Mounting Options
Surface Mount
OnTime clocks have two keyhole slots on the back for surface mounting. The clock back also includes a recess for mounting over an Ethernet receptacle.
Pendant
An optional mounting kit lets you hang OnTime clocks on ceilings, allowing greater visibility in large open areas or hallways. You can also piggyback two clocks, so time is visible from both directions.
To order a double sided digital clock, choose two of the same models and this mounting kit option.
*Note: double sided digital clocks require two Ethernet connections.
Cantilever
An optional mounting kit lets you hang OnTime clocks on walls, allowing greater visibility in large open areas or hallways. You can also piggyback two clocks, so time is visible from both directions.
To order a double sided digital clock, choose two of the same models and this mounting kit option.
*Note: double sided digital clocks require two Ethernet connections.